Dualshock 4 Stick 2 pcs (PS4)

SKU code: 942
Add to favorites
Add to comparison table
Dualshock 4 Stick 2 pcs (PS4)

Dualshock 4 Stick 2 pcs (PS4)

SKU code: 942
Analog sticks for replacement.
SKU code: 942
99 грн.
In stock
  • Курьером по Киеву: 55 грн.
  • Новая Почта по Украине: от 47 грн.
  • УкрПочта по Украине: от 37 грн.
  • Justin по Украине: от 35 грн.
  • Наложенный платёж "оплата при получении" 2% + 20 грн оплачивает клиент.
  • На карту ПриватБанк или Моно (без комиссии).
  • Оплата на сайте любой картой "Мира" MasterCard или Visa.
  • Order by phone+38 (066) 740-66-35
    Заказывайте товар просто позвонив нам
    Мы отправляем вашу покупку в курьерскую службу в день заказа
    Гарантия и качество
    Гарантированный возврат товара течение 14 дней
    Удобная оплата
    Оплатите покупку онлайн или наличными курьеру

    Customers who bought Dualshock 4 Stick 2 pcs (PS4) also bought

    • Analog sticks inDualshock 4 eventually climb or just break into small pieces. It depends on the manner of play and is the most vulnerable point of this accessory.

      If you have a very sad story with analog sticks, then we offer a new product -Dualshock 4 Stick 2 pcs... The cost of them allUAH 50... In order to make a replacement, you need:

      We need a Phillips screwdriver and a flat plastic screwdriver (or just a flat object in order not to damage the controller body).

      one) Make sure the Phillips screwdriver fits perfectly. This is necessary in order not to damage the bolts, which are only 6.0 mm in diameter. If you damage them, then you cannot open the Dualshock 4 without damaging the case.

      2)The body of the Dualshock 4 controller consists of two parts. After unscrewing the bolts, we need to separate this accessory into two parts. Use a plastic screwdriver or similar object to carefully separate.

      3) Take your time to separate the controller body. In addition to the bolts, the two halves of the case are also connected by a loop. It needs to be disabled.

      PS: it is possible that when opening, two springs will fall out, which hold the buttons R2 and L2. Also the Reset button will drop out too.

      four) After removing the bottom cover of the gamepad - disconnect the battery and unscrew the bolt under it.

      five) Disconnect one more cable and then carefully remove the joystick board.

      6) Change the bad sticks to new ones and spin everything back.

    • Loading data...
    Close window
    (Window will close in sec)